Home Accessories Passive Video Receiver
Passive Video Receiver
4616VPS

20104413432736140FS-4616VPS

16-CH Power Supply Passive Video Receiver Hub

The FS-4616VPS is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568Bstructured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room. The Power SupplyPassive Video Receiver Hub provides 12VDC /24VAC power to camera while worked with FS-4301VPT-II. Power transmissiondistance reach up to 1000ft(300m).

Major Features

  • Provides camera power while receiving video transmission both over a single 4-pair UTP cat5e/6 cable
  • Color video up to 1300ft(400m) via UTP cat5e/6
  • Power camera; Max 1A per channel
  • Transmit 12VDC/24VAC power up to 1000ft /300m
  • Use with FS-4301VPT at camera
  • BNC male and RJ45 Jack
  • NTSC, PAL & SECAM video format compatible
  • Real-time transmission
  • Exceptional interference rejection
  • Built-in TVS(Transient Voltage Suppressors) for surge protection
  • Lightning protection design Grade
  • Wave Filter Design, Anti-Static Design
  • Black galvanized housing
  • Rack, wall mountable and desk installation with 4 rubber feet

 

Applications

  • Security Monitoring System
  • Multimedia Network Teaching System
  • Medical Monitoring Display System
  • Industrial Automation Control System
  • Department Store Security
  • Casino Security
  • Remote Network Server Monitoring
  • Banking, securities, financial information display system
  • Hospitals, Airports and banks
  • School Campuses

 

Specifications

Model FS-4616VPS
Product Name 16- Channel Power Supply Passive Video Receiver Hub
Applied Devices CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment
Video Video Format PAL, NTSC, SECAM
Operating Frequency DC to 5MHz
Max Distance UTP Category 5e (24AWG) Color: 1300ft(400m) B&W: 1950ft(600m)
Common-mode/Differential-mode rejection 15 KHz to 5 MHz 60 dB typ
Impedance Coax, Male BNC 75 ohms
UTP,RJ45 100 ohms
Attenuation 0.5 dB typ
Wire Type Network Wiring One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
Category Type 2 or better
Impedance 100 ± 20 ohms
DC Loop Resistance 52 ohms per 1,000ft (18 ohms per 100m)
Differential Capacitance 19 pF/ft max (62 pF/m max)
Power Power Input No external power required
Power transmission 12V/24V,DC/AC, up to 1000ft(300m) via UTP cat5e/6
Connector Video input RJ45 Jack
Video output Female BNC connector
Protection Surge Protection Built-in Transient Voltage Suppressor(TVS)
Antistatic YES
Mechanical

 

Dimensions(L*W*H) mm
Housing Black galvanized
Body Color Black
Net Weight
Environmental

 

Operating Temperature -25º ~ 75º C
Relative Humidity 0~95% (non-condensing)
Storage Temperature -40º ~ 150º C

Wire and Cable Recommendations

FS-4616VPS is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG. Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more)with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltagespower circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps andany resistive, capacitive or inductive devices MUST BE removed from the pair.

For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technicalassistance.

Wiring Diagram

20104413443149023-1

 

 

 

 

 

FS-4616VPS Specs (pdf)

FS-4616VPS_BrochureUSA_ad_060610_v11-1

Get Free Adobe Reader

Get Free Adobe Reader